Product/Service

Dynamic Technologies

Source: Decibel Products Division
MaxFill is a feature that minimizes co-channel interference and enhances close in coverage, and MaxGain is a technology that increases signal strength and the distance it travels
Decibel Products Divisiona feature that minimizes co-channel interference and enhances close in coverage, and MaxGain is a technology that increases signal strength and the distance it travels.

The design of the MaxFill technology provides an upper side lobe suppression greater than 18 dB down from the main beam and a consistent null fill across the entire bandwidth. This optimization can be achieved with minimal loss of maximum gain on the horizon (less than 1 dB). By operating on a unique feedline system that creates a well-defined pattern, this technology slashes co-channel interference, bolsters weak signals, and eliminates gaps in coverage.

MaxGain provides an extra boost of power by extending the signal range to the maximum distance possible and delivers electrical performance with very little loss of gain at the band edges, with VSWR typically 1.4:1 or better. It also provides the front-to-back ratio needed for optimal coverage.

The DB 970/980 series of PCS panel antennas provide high gain (8 to 16.5 dBd) with a front-to-back ratio of >25 dB. Frequency ranges are 1710 - 1880m and 1850 -1990 MHz.

<%=company%>, 8635 Stemmons Freeway, P. O. Box 569610, Dallas, Texas 75356-9610. Phone: 214-634-8502; Fax: 214-631-4706.