Controls up to 12 devices:
The RM-AV2100 can control up to 12 devices. Buttons are labeled for TV, VCR1, VCR2, VCR3, DVD, Cable/Satellite, Amplifier/Receiver, CD, MD/DAT, Tape A/B, Tuner and DSP components. Components may be reassigned or copied, for instance convert "VCR3" into a second CD player.
15 system control macros:
Each can be up to 16 steps long. Three are available at all times on dedicated System Control buttons. Another twelve may be assigned to the Component Select buttons and run when the button is held down for two seconds. Delays between commands may be configured for each macro, to either 125ms, 400ms, 700ms or 925ms.
Favorite channel macros:
The "TV", "Cable" and "Satellite" devices can have between four and six short macros with 4 steps aliased to the keypad.
The RM-AV2100 features a large database of IR codes for a wide variety of devices. A list of these are provided further down on this page.
With twice the learning memory of the RM-AV2000, the RM-AV2100 can learn onto any LCD or physical button in any device. Learning frequencies extend up to 500KHz.
Strong IR broadcasting:
Four IR transmitters ensure a strong and wide infrared beam.
34 LCD & 22 physical buttons:
33 of the LCD buttons and 5 of the physical buttons have any signal learned to them. Each of the 12 component buttons and 3 system control can have a 16-step macro assigned, as described above, or hold a single learned button.
Dual key assignments:
Some LCD buttons can hold a dual-key sequence; for instance INPUT plus a keypad button from 0 to 6 will directly select the input on a Sony television. A similar feature is available for Sony VCRs. For owners of other equipment these keys may still be learned on. For RECORD functions, you may select between an instant REC button, or a safer REC+PLAY combination.
DVD Player controls:
Power On/Off, Menu Number Buttons, Audio, Display, Play, Pause, Stop, Reverse Scan, Fast Scan, Next, Previous, Subtitle Change, Subtitle On/Off, Angle Change, Menu, Menu Cursor Keys, Execute, Clear and Return.
J&D Electronics, 4373 Maynardville Highway, Maynardville, TN 37807. Tel: 865-992-4312; Fax: 865-992-5393.