Corry Micronics, located in northwestern Pennsylvania, has been producing feedthru capacitors and radio frequency interference (RFI) filters since 1970. The company was originally established in response to the needs of the United States Department of Defense. Today, Corry Micronics manufactures RF and microwave components and assemblies, including RF filters, power amplifiers, and RF switches.
This Non-Reflective SP6T RF Switch operates in the 100 to 1000 MHz frequency range, has a 1.5dB (max) insertion loss, and 50 Ohms impedance. Its two most notable features, however, is that it requires only a positive supply of 10-15 volts, and the fact that it’s RS-422 controlled (most pin diode switches are TTL logic controlled). Download the datasheet for additional information on electrical, mechanical, and environmental specifications for this RF switch.
Corry Micronics has developed a 6-way ultra-wide band power divider that has a typical insertion loss of 2 dB with a frequency range from 800 MHz to 18 GHz. The 6 way power divider is rated at 30W CW or 5W CW per input channel. The design is compact and rugged.
Corry Micronics has developed a 6-way ultra-wide band power divider that has a typical insertion loss of 2 dB with a frequency range from 800 MHz to 18 GHz. The 6 way power divider is rated at 30W CW or 5W CW per input channel. The design is compact and rugged.
Corry Micronics' Gain Horn Antennas operate in the sub-gigahertz to over 100 GHz frequency range. These antennas can be custom manufactured for different applications, including but not limited to aerospace, military, wireless communications, and medical.
Corry Micronics' Gain Horn Antennas operate in the sub-gigahertz to over 100 GHz frequency range. These antennas can be custom manufactured for different applications, including but not limited to aerospace, military, wireless communications, and medical.
Corry Micronics offers a complete line of Filtered Military Circular Connectors, including MIL-C-38999 Series I, II, and III, MIL-C-26482 Series II, and MIL-C-83723 Series III.
For over 30 years, Corry Micronics, Inc. has been manufacturing tubular ceramic capacitors for use in their own filtered products. CMI now sells these same high quality ceramic capacitors direct to companies needing filters in their products. CMI has more than one hundred types and sizes of tubular ceramics already in production.
The DCR-8 is an eight port switch remotely controllable via USB or Ethernet. The switch automatically recognizes either type of control connection. Control microwave signals with a laptop or PC using the USB interface or remotely over the internet.
The DCR-8 is an eight port switch remotely controllable via USB or Ethernet. The switch automatically recognizes either type of control connection. Control microwave signals with a laptop or PC using the USB interface or remotely over the internet.
|
|
|
|
|
|
|
|
|